GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Bedford Solar Panel Removal and Reinstallation for Roof Work

When a roof under solar panels is damaged or worn out, the panels have to come off. The goal is simple: a better roof underneath and the array back in place without new leaks.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

How the process works

1

Inspect the roof and array

Find out what needs repair and which panels must move.

2

Document everything

Photograph the panels, wiring and mounts, and note any existing damage.

3

Remove the panels

Panels and rails are taken off.

4

Repair or replace the roof

The roof gets the work it needs, with new flashing at each mount spot.

5

Reinstall and seal

Panels go back and the roof around the array is checked.

Why Bedford roofs with panels need this

Bedford sees a lot of hail. NOAA's Storm Prediction Center logged 165 hail reports within 10 miles of the city from 2015 through 2024, and 29 of them were 1.75 inches or larger. The largest, 3.25 inches, fell on May 27, 2024. Storms like that can damage the shingles around an array and lead to a repair or full replacement that requires moving the panels.

Age plays a part as well. Half of the homes in Bedford were built before 1983 (U.S. Census Bureau, American Community Survey 2020-2024). Panels added to an older roof often outlast it, so many owners eventually face a reroof with the array in place.

Signs the roof under your panels needs attention

A ceiling stain near where the array sits.

Shingle pieces or granules collecting below the panels.

Hail damage on the slopes around the array.

A roof that is nearing the end of its life.

Mounts that were installed without visible flashing.

Planning the work as one project

The panels and the roof should be treated as one job, not two separate ones. When different companies handle each part, small gaps can open up: who seals the mounts, who checks the deck under the array, who answers if a leak appears a month later. One contractor responsible for both closes those gaps.

It also helps to think ahead while everything is off. This is the best chance to replace soft decking, upgrade underlayment, add ventilation and fix flashing at walls and chimneys. Our post on why roof underlayment matters explains why that hidden layer deserves attention. Doing it now means the panels should not have to come off again for many years.

Getting the details right

New flashing at every mount

Reusing old holes and seals is a common cause of leaks after reinstall.

Full roof, not just around the panels

Replacing only the exposed shingles leaves an older patch under the array.

Clear records

Before and after photos protect you and help if storm damage is part of an insurance discussion. See roof insurance claims.

Landlords and rental homes

About half of Bedford homes are rented. If you own a rental with panels, plan the removal and reroof between tenants when possible, and tell current tenants that the system will be offline for a short time. Our article on how long a roof replacement takes in Texas helps you set expectations.

GemSco handles roofing and solar panel removal and reinstallation with one crew. We are family owned, fully licensed and insured, with 20+ years of experience and free estimates. Learn more on our solar panel removal and reinstallation page or read about roof repair in Bedford.

Frequently Asked Questions

How long will my solar system be offline?

It depends on the size of the roof job and the array, and on the weather. A simple repair takes less time than a full reroof. Ask for a schedule that shows when the panels come off, when the roof work is done and when they go back up.

What if a panel is damaged during removal?

That is why each panel's condition should be recorded before work starts. Talk about how handling damage would be dealt with before signing. Careful removal and storage keep the risk low, but clear records avoid disputes.

Can I upgrade my panels during reinstallation?

It can be a good moment to make changes, since everything is already off the roof. Any changes to the system should be planned before work starts so the mounts and layout fit the new setup. Talk through the options with your contractor first.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE