Planning Solar on a Burleson Roof: Check the Roof Before the Panels
Solar panels and the roof under them have to work together for years. Here is how Burleson homeowners can avoid paying twice for the same roof work.
Schedule Your Roofing Inspection Today
Fill out the information below and we’ll reach out to complete your estimate as soon as possible!
Three questions before you add panels
How old is the roof?
If the roof was installed with the house, it may need replacement before the panels would.
Has hail hit it?
Storm damage under panels is harder and more expensive to reach later.
Who owns the home?
Panels are a decision for the owner. Renters need permission for any roof work.
Burleson roofs and solar timing
Half of the homes in Burleson were built before 2002 (U.S. Census Bureau, American Community Survey 2020-2024). Many of those still have their first roof. Putting panels on a roof that needs replacing soon means paying to take them down and put them back up, a job described on our solar panel removal and reinstallation in Burleson page.
In Burleson, 72 percent of homes are lived in by their owners, so many households can make this call themselves. The smart order is simple: confirm the roof has years of life left, fix or replace it if not, then install the panels.
Hail is part of the plan too. NOAA's Storm Prediction Center logged 8 hail reports of 1.75 inches or larger within 10 miles of Burleson from 2015 through 2024, and the largest measured 4 inches. Ask your insurance agent how panels are listed on your homeowners policy before installation.
Wind is the last piece. Spring storms around Fort Worth bring strong gusts, and an array acts like a sail if its mounts sit in weak decking. Solid structure under every mount keeps the panels and the roof together.
The install, step by step
Roof inspection
Shingles, decking, flashing and the attic are checked. Book a roof inspection in Burleson.
Roof work if needed
Repairs or a new roof are completed before panels go on.
Flashing upgrades
Old flashing near the planned array is replaced, since it will be hard to reach once panels are in place.
Layout
Panels are placed to keep valleys, vents and edges clear for water and airflow.
Mounting
Each mount is fastened into solid structure and flashed so the roof stays sealed.
Final check
The mounts and the roof around the array are checked and photographed.
Common solar roof mistakes
Installing on a worn roof to save time, then paying for removal later.
Sealing mounts with caulk alone instead of real flashing.
Blocking valleys or vents with the array.
Ignoring soft decking where mounts are fastened.
Using separate crews for the roof and the panels with no one responsible for the whole job.
Skipping the attic check, where the first signs of a leaking mount usually appear.
Why one contractor helps
The roof material matters for the mounts. Asphalt shingle, metal, tile and flat roofs each use a different attachment, and tile needs extra care because it cracks under foot traffic. Ventilation matters too: panels shade the roof, which changes how the attic heats up, so intake and exhaust vents should stay clear of the array. Read how roof ventilation protects your home to learn why.
GemSco handles roofing and solar panel installation, so the roof and the mounts are planned as one system. Financing is available, and estimates are free. Learn more about solar panel installation or our Burleson roofing page.
Frequently Asked Questions
How do I know if my Burleson roof is ready for solar?
A roof inspection is the best way. A roofer checks shingle condition, decking strength, flashing and ventilation, and tells you how much life the roof has left. If it is close to the end, replacing it first avoids removing and reinstalling the panels later.
Can solar panels go on a metal roof?
Yes. Standing seam metal roofs often allow mounts that clamp onto the seams, which means fewer holes in the roof. Other metal profiles use different mounts. The right method depends on the type of metal roof and its condition.
What happens if my roof gets hail damage after panels are installed?
Panels may need to be removed so damaged shingles underneath can be repaired or replaced. Panels themselves can also be damaged by large hail. Whether repairs are covered depends on your policy and your insurance company, so review your coverage with your agent.
More Roofing Help in Burleson
Roofing in Burleson, TX
City overviewRoof Repair in Burleson
Learn MoreRoof Replacement in Burleson
Learn MoreStorm & Hail Damage in Burleson
Learn MoreRoof Inspection in Burleson
Learn MoreCommercial Roofing in Burleson
Learn MoreGutters in Burleson
Learn MoreSolar Removal & Reinstall in Burleson
Learn MoreSolar Panel Installation Near Burleson
Solar Panel Installation in Crowley, TX
Learn MoreSolar Panel Installation in Forest Hill, TX
Learn MoreSolar Panel Installation in Cleburne, TX
Learn MoreSolar Panel Installation in Mansfield, TX
Learn MoreSolar Panel Installation in Benbrook, TX
Learn MoreSolar Panel Installation in Arlington, TX
Learn MoreWe’re Here to Help!
GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.