GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Tomball, TX Solar Panel Removal and Reinstallation for Roof Work

When the roof under your panels is damaged or worn out, the array has to come off. Planned well, the panels go back onto a stronger roof.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

When panels need to come off

The roof needs a full replacement.

Hail damaged the shingles under or around the array.

A leak traces back to a mount or flashing under a panel.

Decking under the array is soft or rotted.

You are upgrading to a new roof material before more storms.

A storm cracked panels that need to be swapped while the roof is open.

Why it happens often around Tomball

NOAA's Storm Prediction Center logged 28 hail reports within 10 miles of Tomball from 2015 through 2024. Six were 1.75 inches or larger, and hail of 2.75 inches was reported on April 19, 2015. Panels can shield part of the roof, but the shingles around them, and sometimes below them, still take hits. Damage hidden under an array is easy to miss until it leaks.

Age is the other driver. Half of the homes in Tomball were built before 1994 (U.S. Census Bureau, American Community Survey 2020-2024). Many arrays were added to roofs that were already middle-aged. As those roofs wear out, the panels must come down for a roof replacement in Tomball.

Since about 52 percent of Tomball homes are owner occupied, many arrays sit on rentals. Landlords should give tenants notice and plan for the system to be off during the work.

The same storms that damage shingles can also crack panel glass, so a full look at both the array and the roof after a big hailstorm makes sense.

How the work is done

1

Document everything

Photos and notes record panel layout, racking and mount locations.

2

Remove and store

Panels and racking are taken down and kept safe during the roof work.

3

Repair or replace the roof

Damaged materials are replaced and mount spots are prepared with new flashing.

4

Reinstall the array

Racking and panels go back in the documented layout, with each mount sealed.

5

Final check

The roof around the array is checked for loose or damaged materials.

Make the most of the panels being down

Upgrade the shingles

Impact-rated shingles tested to UL 2218 Class 4 are worth a look in an area with Tomball's hail record.

Fix the deck

Any soft decking under the array can be replaced while it is exposed.

Refresh flashing

New flashing at every mount and wall gives the roof a clean start.

Check ventilation

Good attic airflow helps shingles last. See how roof ventilation protects your home.

Storm damage and next steps

If hail started the project, coverage depends on your policy and your insurer's review. GemSco inspects, documents with photos and gives a written estimate that covers both the roof and the panel work. See hail damage roof repair in Tomball and our solar panel removal and reinstallation page. Estimates are free.

Before the crew arrives, clear the driveway and the area around the house, and take your own photos of the panels and roof. Keep the system paperwork handy so any question about the equipment can be answered quickly. Our guide on what happens during a professional roof replacement explains the roof side of the job, so you know what to expect while the array is down.

Frequently Asked Questions

Can I leave the panels on and repair around them?

Sometimes, if the damage is away from the array and easy to reach. If the problem is under or next to the panels, they need to come off so the roof can be repaired properly. Working around an array often leaves the real damage untouched and leads to repeat leaks.

How long will my system be off?

It depends on the size of the array and the scope of the roof work, plus the weather. The system is off from removal until reinstallation is finished. Your estimate should include a schedule, and you can use your monitoring app to confirm the system is running again afterward.

Should I check with my solar provider first?

Yes. Some providers or financing agreements have rules about who may move the equipment. Find your paperwork, check those terms and share them with the roofer before work starts. That avoids problems with any coverage or support you have on the system.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE