GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Solar Panel Removal and Reinstallation for Greenville Roofs

Panels often outlast the roof they were installed on. When the roof gives out first, here is how Greenville owners can handle the removal and reinstall.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Why it comes up in Greenville

Half of the homes in Greenville were built before 1979 (U.S. Census Bureau, American Community Survey 2020-2024). On houses that age, panels may have gone onto a roof that was already partway through its life. When that roof wears out, the array has to come down before anyone can replace it.

Storms can force the timing. NOAA's Storm Prediction Center logged 4 hail reports of 1.75 inches or larger within 10 miles of Greenville from 2015 through 2024, including a 2.5-inch stone on June 13, 2023. Damage to shingles around and under the panels cannot be fixed properly with the array in place.

Leaky mounts are the other trigger. Older installs often relied on sealant alone, which shrinks and cracks after a few Texas summers. Water then follows the bolt into the decking and can show up in the attic far from the array.

Reasons panels come off

Full roof replacement.

Hail or wind damage under or around the array.

Leaks at one or more mounts.

Soft decking found under the panels.

Moving panels to a better slope.

Rodents or nests under the array that damaged wiring or roofing.

Upgrading to a better roof material, such as an impact-rated shingle.

The process

1

Before photos

The roof and system are photographed and checked so their condition is on record.

2

Confirm the electrical side

The electrical shutdown belongs to your solar provider or an electrician. Settle who does it before any panel moves.

3

Careful removal

Panels and racking are taken down.

4

Roof work

Repair or replacement, including deck repair and new flashing at mount points.

5

Reinstall and seal

Racking goes back into solid framing, panels are reattached and the roof around the array is checked. You get photos of the new flashing at each mount.

Before you schedule

Read your solar terms

Some makers or installers have rules about who can remove the system.

Talk to your insurer

If storm damage is involved, coverage depends on your policy and company.

Ask for line items

Removal and reinstall should be listed apart from the roof work. See what to include in a roof replacement estimate.

Plan the downtime

The system is off while the panels are down.

One crew for the whole job

When two companies split the job, one removes the panels and another replaces the roof, the timing has to match two schedules and no one clearly owns the flashing at the mounts. If a leak shows up later, each can point to the other. Keeping the removal, the roof and the reinstall with one crew avoids that gap.

GemSco does solar panel removal and reinstallation along with the roof work, so nobody has to coordinate two companies. If storm damage started it, see hail damage repair in Greenville. For roof work after the array is off, see roof replacement in Greenville.

Keep the before and after photos with your roof and solar records. They help with any future repair and show the condition of the roof if a storm hits later.

Frequently Asked Questions

Can a roof be replaced around the panels without removing them?

Not properly. The shingles, underlayment and decking under the array cannot be reached with panels in place. Working around them leaves old roofing under new, and the mounts cannot be re-flashed. Removal is the only way to do a complete job.

Can damaged panels be swapped during reinstall?

Yes, if replacements are available that match the rest of the system. Panels cracked or bent by hail should be checked while they are on the ground and replaced if needed. Confirm that any new panel fits the system and its paperwork before it goes back on the roof.

How do I find out if the roof under my panels is in trouble?

Look for stains in the attic under the array, granules or shingle pieces in the gutters below and debris building up under the panels. A roofer can check the exposed edges and the attic and tell you whether removal is needed for a full repair.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE