GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Solar Panels in Fulshear Start With the Roof

Panels sit on the roof for many years. Before you add them, make sure the roof under them is ready. Here is how to think it through in Fulshear.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Four roof questions to answer first

How old is the roof?

If the roof will need replacing in a few years, panels would have to come off for that work.

Any storm damage?

Hail bruises under a panel are hard to reach later. Fix them first.

What is it made of?

Asphalt shingle, metal and tile each use different mounts and flashing.

Is the decking sound?

Mounts are fastened through the roof. Soft decking needs repair before anything is attached.

Which way does it face?

Panel layout depends on roof planes, shade from trees and obstructions like vents and chimneys.

What Fulshear's data says about solar-ready roofs

Fulshear has an edge here. Half of its homes were built before 2016, so the other half are newer (U.S. Census Bureau, American Community Survey 2020-2024). Many roofs are young enough to carry panels for a long time before they need replacing. And 90 percent of homes are owner occupied, so most people weighing solar can make the call without a landlord.

Hail still matters. NOAA's Storm Prediction Center logged 10 hail reports within 10 miles of Fulshear from 2015 through 2024, and 2 of them were 1.75 inches or larger, the biggest at 2.5 inches on May 9, 2019. Ask how panels and mounts handle hail, and check that the roof under them has no hidden damage from past storms.

In short, a younger roof is a good base, and a recent inspection removes the guesswork about hidden storm damage.

How a solar job works with GemSco

1

Roof check

The roof is inspected first. See roof inspection in Fulshear.

2

Repairs if needed

Damaged shingles, flashing or decking are fixed before mounting.

3

Layout

Panel placement is planned around vents, valleys and the roof edges.

4

Mounting and sealing

Each attachment point is flashed and sealed so it does not become a leak.

Why mounts are a roof detail

Every mount is a hole in the roof. Done well, each one is flashed and sealed so water runs over it like any other roof part. Done poorly, it becomes a slow leak hidden under a panel, where nobody looks for years. Our guide on signs your roof flashing is failing shows what that kind of damage looks like.

Questions to ask any solar installer

Who is responsible if a mount leaks later?

How are roof penetrations flashed on my roof type?

What happens to the panels if the roof needs repair or replacement?

Will the roof be inspected before the panels go on?

How will the roof be protected while crews walk on it?

What paperwork will I get about the mounts and their locations?

Roof and panels from one company

GemSco does roofing, solar panel installation and solar panel removal and reinstallation. That means the roof under the panels is part of the plan from the start. If your roof needs work first, we can handle it as part of the same project. Learn more on our solar panel installation page, read about roof replacement in Fulshear, or visit our Fulshear page. Estimates are free and financing is available.

Frequently Asked Questions

Is my Fulshear roof too new to need a check before solar?

A newer roof is a good starting point, but a quick inspection still makes sense. It confirms there is no hail damage, that flashing is in good shape and that the decking can hold mounts. Fixing small issues now is far easier than after panels cover them.

Can panels go on a tile or metal roof?

Yes, but the mounting method changes. Tile often needs special hooks or replacement tiles at each mount. Metal roofs may use clamps or specific attachments. Your installer should explain how the roof stays watertight at each point.

What if my roof needs replacing after the panels are installed?

The panels have to come off, be stored safely and go back on after the new roof is in. This is the work of solar panel removal and reinstallation in Fulshear. Planning roof work before solar avoids that extra step.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE