GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Installing Solar Panels on Angleton, TX Roofs the Smart Way

The panels get the attention, but the roof decides how well a solar project ages. Here is what Angleton homeowners should check first.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Angleton roofs and solar timing

Half of the homes in Angleton were built before 1979 (U.S. Census Bureau, American Community Survey 2020-2024). Many roofs on those houses have been replaced along the way, but not all at the same time. If your current roof is already past its middle years, putting panels on now could mean taking them off again for a new roof in the near future.

In Angleton, 67% of homes are lived in by their owners. The decision to add panels belongs to the owner, so that figure gives a sense of how many households can make the choice. If you rent, talk with your landlord first. If you own, the first step is a clear look at the roof through a roof inspection in Angleton.

Roof type matters as well. Shingle, metal, stone-coated steel and tile each use a different mount. A roofer who works on all of them can tell you how each attachment will be sealed on your roof and whether any part of the surface should be updated first.

What the roof needs before panels

Years of life left

Panels stay up for a long time. The roof under them should be in good shape for most of that time.

Solid decking

Every mount is fastened through the roof into the structure. Soft or rotten wood has to be fixed first.

Clean flashing

Chimneys, vents and walls near the array should be sealed before the panels make them harder to reach.

Good drainage

Gutters and valleys need to move water freely, since panels change how rain runs off.

Our order of work

1

Inspect

Shingles, decking, attic and flashing are checked and photographed.

2

Fix or replace

Needed repairs, or a full roof replacement in Angleton, are done before mounting.

3

Lay out the array

Panels are placed to keep vents and valleys clear.

4

Mount and seal

Each mount gets flashing under the shingles and sealant at the bolt.

5

Review

The roof around the array is checked once the panels are set.

6

Keep records

Photos of the roof before and after the install are kept for future reference.

Weather to plan for

Hail: NOAA's Storm Prediction Center logged 3 hail reports of 1.75 inches or larger within 10 miles of Angleton from 2015 through 2024, up to 2.5 inches on April 17, 2015.

Wind: all of Brazoria County is in the TWIA catastrophe area. If your home has TWIA coverage, ask your agent how added roof equipment affects your policy and any WPI-8 needs.

Heat: sun and heat age shingles, and panels shade part of the roof. Learn more in how Texas heat affects asphalt shingles.

Heavy rain: water and debris can collect along the bottom edge of an array, so gutters below should be checked.

Talk to GemSco

GemSco installs solar panels and handles the roof under them, which keeps one company responsible for both. If the roof needs work later, panels can be removed and put back; see solar panel removal and reinstallation in Angleton. We are fully licensed and insured, have 20+ years of experience and offer free estimates. Read about solar panel installation or our page for Angleton.

Frequently Asked Questions

How old is too old for a roof to get solar panels?

There is no single number. It depends on the material and condition. A roof with curling shingles, heavy granule loss or soft decking should be fixed or replaced first. An inspection gives you a realistic estimate of how many years it has left.

Can solar panels protect the roof from hail?

Panels cover part of the roof, but the rest stays exposed, and the panels themselves can be damaged by large hail. Panel impact ratings vary by product. After a big storm, the whole roof and the array should be checked.

Who fixes a leak near the panels later?

Ask that question before you sign. When the same company handles the roof and the panels, there is no back-and-forth about who is responsible for a leak at a mount. Keep records of the install and the roof condition.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE