GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Commercial Roofs in Celina: Planning for Hail From Day One

Commercial roofs are mostly low-slope or flat, and they handle hail and water differently than a house. Here is what building owners and managers should know.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Commercial roofing services we provide

Inspections of flat, low-slope and metal roofs.

Repairs to membranes, seams, flashing and drains.

Full commercial roof replacement when repairs no longer make sense.

Storm damage documentation with photos.

Steep-slope shingle work on offices and multi-family buildings.

Storm exposure for Celina properties

Celina sits across Collin and Denton counties. NOAA's Storm Prediction Center logged 55 hail reports within 10 miles of the city from 2015 through 2024, with 14 of them 1.75 inches or larger. The biggest stone in that period was 3 inches, on April 6, 2018.

Large flat roofs collect every stone that falls on them. Hail can puncture or bruise a membrane, crush the insulation boards below and dent rooftop equipment. Because the roof is hard to see from the ground, damage often goes unnoticed until water shows up inside, sometimes far from where it entered.

Wind adds its own risk. Gusts that get under a loose edge can peel back flashing and lift membrane along the perimeter. Once the edge opens, rain blows in at roof level, and the damage can spread across the roof quickly if no one notices. Checking edges and coping after storms is a simple habit that prevents bigger repairs.

Common commercial roof systems

TPO

A white or light single-ply membrane with heat-welded seams. Common on newer retail and office buildings.

EPDM

A rubber membrane, usually black, with glued or taped seams. Our TPO vs. EPDM roofing article compares the two.

Modified bitumen

Layered sheets often used on smaller flat roofs.

Metal

Used on many light industrial buildings. Seams, fasteners and panel ends need regular checks.

Building a roof plan that fits a growing area

Many commercial buildings in fast-growing areas are new, and owners assume the roof needs nothing for years. In practice, the first problems usually show up at drains, curbs around rooftop units and perimeter flashing. Foot traffic from HVAC service also wears membranes in the same paths over and over.

A simple plan helps: inspect twice a year and after big storms, keep drains clear, and fix small issues right away. Our commercial roof maintenance plan guide lays out a schedule. When a roof is older or damaged, our article on signs a commercial roof needs replacement helps you judge where it stands.

How we work on commercial sites

1

Walk the roof with you

We share what we find, with photos, so decisions are based on facts.

2

Scope in writing

Free written estimates spell out materials and the areas to be repaired or replaced.

3

Schedule around operations

We plan work to limit noise and disruption for tenants and customers.

4

Close out cleanly

Debris is removed and the roof is checked before we leave.

Talk to GemSco

We handle residential and commercial roofing, are fully licensed and insured, and bring 20+ years of experience. Estimates are free. See our commercial roofing page, or tell us about your building and its roof so we can plan a visit that fits your schedule.

Frequently Asked Questions

How do I know if hail damaged my commercial roof in Celina?

From the ground you usually cannot tell. Look for dents on rooftop units, vents and gutters, and stains on ceiling tiles inside. A close inspection checks the membrane for bruises and punctures and may test whether the insulation under it is still dry.

Is TPO or EPDM better for a Celina building?

Both work well when installed correctly. TPO is light-colored and has heat-welded seams. EPDM is a durable rubber with glued or taped seams. The best choice depends on the building, the existing roof and how it will be used. We explain the trade-offs during the estimate.

Can you work while my business stays open?

In most cases, yes. We plan the work to limit noise, keep entrances clear and protect the inside of the building. Talk to us about your hours and any sensitive areas so the schedule fits your operation as closely as possible.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE