GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Adding Solar in Prosper? Check Your Roof for Hail Damage First

A newer Prosper roof looks like a perfect base for panels. Often it is. But hail can leave hidden damage, and once panels go on, that damage is far harder to reach.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Before any panels go up

Confirm the roof has no hail bruises, cracks or lifted shingles.

Check flashing, vents and pipe boots where panels will sit nearby.

Make sure the decking is solid and dry.

Know how much life the roof has left.

Plan who will handle panel removal if the roof ever needs work.

Prosper roofs: young, but storm-tested

Half of the homes in Prosper were built before 2014 and half after (U.S. Census Bureau, American Community Survey 2020-2024). Many roofs here are young enough to carry panels for a long time. That is good news for solar.

The catch is hail. NOAA's Storm Prediction Center logged 146 hail reports within 10 miles of Prosper from 2015 through 2024, and 50 were 1.75 inches or larger. Large hail fell in 8 of those 10 years, and a 4.5-inch stone was reported on March 24, 2019. A roof that has taken hits may look fine and still have cracked shingles. If panels cover that damage, the next leak means taking the array apart.

About 88% of Prosper homes are owner occupied, per the same Census survey, so most homeowners here can make the roof and solar decisions together.

How the roof and the array affect each other

Mounts are roof penetrations

Each one must be flashed and sealed. Poor sealing is a common source of leaks under arrays.

Panels hide the roof

Damage under the array is hard to see. Inspect before installing so you start with a clean roof.

Repairs need panel removal

Most roof work under the array means taking panels off. See solar panel removal and reinstallation in Prosper.

Weight and structure

The framing must handle panels and racking. That is part of the planning.

A sensible order of work

1

Roof inspection

Start with a roof inspection in Prosper and get photos.

2

Repairs first

Fix hail damage, flashing and vents before any racking goes on.

3

Design the layout

Plan around vents, valleys and edges so water still drains freely.

4

Install and seal

Mount, flash and seal each attachment point, then install panels.

5

Record the work

Keep photos of the roof before and after installation.

Living with panels after a storm

Once the array is up, your storm routine changes a little. After large hail, look at the exposed shingles from the ground and check the panels for cracked glass. Look in the gutters below the array for granules. If anything looks off, have the roof inspected, including the edges under the panels.

Keep a folder with the panel paperwork, the roof inspection from before installation and photos of the finished array. If you ever need repairs or a claim, those records make the conversation much simpler. Our list of photos to take after roof storm damage is a good guide.

Roof and solar with GemSco

GemSco installs solar panels and handles roofing, so one team looks after the roof and the array together. We are family owned, fully licensed and insured, with 20+ years of experience. Estimates are free and financing is available. Learn more about our solar panel installation service or our Prosper roofing page.

Frequently Asked Questions

Is a roof about ten years old ready for solar?

It can be, if an inspection shows it is in good shape. In Prosper, the key question is whether hail has damaged it. A clean report means you can move ahead. If the roof has hail damage, repair or replace it first so you do not have to remove panels later.

Can solar panels protect my roof from hail?

Panels cover part of the roof, but they are not a hail shield. The exposed areas still take hits, and panels themselves can be damaged. Plan for inspections after large storms that include the roof around and under the array.

Who should install the panels, a roofer or a solar company?

The best result comes when the roof and the array are planned together. A roofer knows how to flash and seal mounts, and solar work requires electrical knowledge. Working with a company that handles both reduces gaps in responsibility if a leak shows up later.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE