GREEN ROOF PROGRAM Now Available in TX - Claim Your Free Roof Today!

Solar in Corinth: Making Sure the Roof Is Ready for Panels

The panels get the attention, but the roof underneath carries them for years. In a hail-heavy area like Corinth, the roof check comes first.

Schedule Your Roofing Inspection Today

Fill out the information below and we’ll reach out to complete your estimate as soon as possible!

Call (844) 980-5506
20+ yearsOf experience
FinancingIs also available
DiscountsMilitary, first responders and seniors
Family ownedFully licensed and insured
Houston · DFWAustin · San Antonio

Three roof questions before solar

How much life is left?

If the roof will need replacement soon, do it first so the panels do not have to come off later.

Is there hidden damage?

Hail bruises, worn flashing and soft decking should be fixed before panels cover them.

Can it be serviced?

The layout should leave room to reach vents, valleys and edges.

Corinth homes, ownership and storms

In Corinth, 77 percent of homes are owner occupied, so most residents can decide on solar for their own roof. Half of the homes were built before 1997 (U.S. Census Bureau, American Community Survey 2020-2024). Many of those houses already have a second roof, and its age varies a lot from one home to the next. Knowing yours is the first step.

Hail is the other factor. NOAA's Storm Prediction Center logged 178 hail reports within 10 miles of Corinth from 2015 through 2024, with 57 of them 1.75 inches or larger and a maximum of 4.25 inches on March 26, 2017. A roof with storm damage under an array is harder to inspect and repair. Ask the panel maker how its glass is rated for impact, and plan for the roof to be checked after large storms even with panels in place.

From roof check to finished array

1

Inspect the roof

Start with a roof inspection in Corinth to see its condition and age.

2

Repair or replace first

Fix damage or replace a worn roof before mounting anything. See roof replacement in Corinth.

3

Plan the layout

Place panels where they do not block water flow and leave service access.

4

Mount and flash

Anchor mounts into framing and flash each one with the roofing.

5

Record everything

Photos of the roof and mounts before the panels cover them.

Red flags in a solar proposal

No mention of the roof's age or condition.

Mounts sealed only with caulk, without flashing.

Panels placed across valleys or tight against the ridge.

No plan for who handles leaks at the mounts later.

No photos promised of the flashed mounts before the panels go on.

Solar installation with GemSco

Think of the roof and the array as one project with two parts. The roof has to outlast the panels on it, or the panels will need to come off for a roof job down the road. Planning both together, and keeping clear records of each, saves work later. That includes photos of each flashed mount before panels cover it, the panel and racking specs and the roof's install date.

After a large storm, have both the panels and the roof checked. Damage under or around an array is easy to miss from the ground.

GemSco does roofing and solar work, so one team looks after the roof and the panels together. We are family owned, fully licensed and insured, with 20+ years of experience. Estimates are free, and financing is available. Learn more about our solar panel installation service, or read why roof underlayment matters to understand what sits beneath the panels.

Frequently Asked Questions

Is my roof too old for solar?

It depends on its condition, not just its age. An inspection shows how much useful life remains. If the roof will likely need replacing within the next several years, replacing it first is often simpler than removing the panels later to do the work.

Can panels go on a metal or tile roof?

Yes, with mounting methods made for each material. Metal roofs may use clamps on the seams, while tile often needs special hooks or replacement tiles at each mount. The installer should explain how each attachment is sealed.

What happens to the roof under the panels during a hailstorm?

The panels shield part of the roof, but the edges and the rest of the roof are still exposed. Mounts and flashing can also take hits. After a large storm, have both the array and the roof inspected and documented.

We’re Here to Help!

GemSco Roofing & Solar serves Houston, DFW, Austin, San Antonio and surrounding areas. We’re family owned and fully licensed and insured.

Call (844) 980-5506 GET A FREE QUOTE
Call GET A FREE QUOTE